The high-efficient fiber-bundle filter adopts fibers which has specially processed and relatively high bulkiness and strong adsorption as its filtering material. Inside the equipment, there are several vertical fiber bundles with upper ends fixed on the porous plate and lower end fixed on the floating porous plate, which improves the efficiency and effect of the filter under the condition that the resistance of filter is not increased. In the case of filtration, the floating porous plate moves along the direction of water flow under the pressure of water pressure at the entrance. Due to the principle of fluid movement, the distance between two porous plates become close, which makes the fiber bundle under the state of being compressed. According to the principle of hydromechanics, the density of the filtering material of fiber will be adjusted automatically, so as to bring the interception of filtering layer into full play, so as to make the turbidity of output water less than 1mg/L after filtration when the turbidity of input water is less than 20mg/L.

When it is cleaned, the floating porous plate will return to its original place without the water pressure at the entrance, which makes fibers relaxed, and the water and compressed air is inlet to wash out all intercepted and adsorbed impurities.

Operating Pressure：0.1MPa~0.6MPa

Operating Temperature：５℃～40℃(Customized for special temperature)

Flow rate of single filter0.5 m³/h ~210m³/h

Operation Mode: Manual Operation

Product Specification： ф300~ф3000

Strength of Back Flushing：10～12L/m2·S

Filtration Rate:：20m/h~50m/h    Ordinary30m/h